Wanted
If you have something you are looking for you can place an ad just as if you have something for sale.
Then leave the price blanks and in the comments section start by saying WANTED _____ whatever it is you are looking for.
This way people browsing a category can see you are looking for something and contact you there.
Looking for any & all replacement parts for a Harken 2 Furler from late 1980’s era, especially the drum, spool and torque tube. thanks in advance, AB
Not sure if I have the specific items mentioned in your ad, but I’m sure I have the aluminum foil sections and probably the splice pieces/connectors for them. If interested, contact me at legend-rigging@sbcglobal.net. It is possible that I have other parts (maybe even spool), but other parts would be buried somewhere deep in unmarked boxes – not sure how soon I’d be able to find.
I have 7 sections and connectors for the Hood 800sf
if you are interested in buying.
Angela, If you look in wantes section there is a relpy to you enquiry for Harken Furler, see below
Not sure if I have the specific items mentioned in your ad, but I’m sure I have the aluminum foil sections and probably the splice pieces/connectors for them. If interested, contact me at legend-rigging@sbcglobal.net. It is possible that I have other parts (maybe even spool), but other parts would be buried somewhere deep in unmarked boxes – not sure how soon I’d be able to find.
Need a boom for a Cal 2-24.
we have quite a few booms if your in Annapolis
Steve, give me a call at your convenience. I’m looking for a replacement main sail for my Bristol 40-
are u scraping boats,i’m looking for a keel for a 1981 Hughes Columbia 36 center cockpit, weights 6000 pounds,i think the bolts rusted and it fell off thanks bob ps could fab a steel or cast one off any 36ft if its scrap price
I have a boat that I’m trying to sell all I want is the engine and trailer make me an offer on the rest if you can use it. I know nothing about boats but if you call me 470-594-4162 maybe we can figure out what I have and if you could use what you need. Thank you my name is Raul.
Sorry 480-594-4162 made a mistake
Hi Steve
I do not need the boom, but reconized your name, as I used to live in Annap. and was always in your store at the old eastport location.
But i am in Houston now , and know your brother Robert well, as we play pool allot..
and i must report Robert has made a great improvement in his pool playing skills.
I will be in Md next week and hope to stop by,
my contact
Lefty Rowe
281-333-0397
sailor2000@verizon.net
hi my name is jim benson
yes i still have the (boom for a Cal 2-24)
for sale pls get back to me if you her still interested still in good condition
We have several booms available. What is the length of the boom you need? Do you want internal outhaul and reefing lines?
WANTED looking for a 10 ft boom for a 21 ft Newport call or text Bob 2318870201
I m looking Mast for sun odyssey 52.2 .and sails.Year 2002.thanks
I have about 6 booms from 8-10′. Where are you located. Shipping could be expensive. I am in Mass. 02726
Thanks,
Ted
I have an original one located in NJ…cheap if you still need one
hi my name is jim benson
yes i still have the ( all replacement parts for a Harken 2 Furler from late 1980′s era, especially the drum )
for sale pls get back to me if you her still interested still in good condition
—
Hello,
Let me know if you are still in search for the requested item on your AD as i do have and willing to sell out.
Thanks.
BEST WISHES AND REGARDS
ALEN.
We have quite a bit of old furling system extrusions and equipment. If you can send some pictures of what you are needing, we can check our inventory. You can also go to http://www.boatersresaleshopoftexas.com and browse our online store.
I think we have what you need. Call us 10AM to 5PM Central time at 713-614-8884.
—
i have the requested item stated in your id please get back to me with what you are looking to to my email address kelvin152201@gmail.com
I just replaced mine with a complete Harken 4 off a 40 sloop was nothing wrong and fully operable. including Hydraulic back stay which needs a 300 dollae rebuild. Did a complete rig change. Asking 900 complete…Rock Hall, Md
Please let me know if you are still in need of the above and I’ll get back to you. What’s your phone # ?
Many thanks,
Macaulay Hopkins
Springridge Rd Raymond MS 39154,
USA.
If anyone still needs Harken 2 furler parts I have one complete with all parts
I’m sure we plenty of those units in the warehouses. I am about to make an inventory run within the next week and will keep my eye out.
Best,
Joshua
om / sailboat company
805-234-0559
http://www.omsailco.com
EVERYTHING YOU NEED FOR A BOAT FRESH/SALTWATER- MY PARENTS PASSED AND BOAT BUSINESS FOR 40 YEARS- GREAT DEAL IF INTERESTED 714 799-0600 OR 951 722-208 MICHELLE
Looking for spare parts for Navik Plastimo Self Steering Gear. Thank you for your interest.
Stephen,
I have your e-mail inquiry. The Navik unit I have for sale is in virtually new condition. Therefore I’m reluctant to part it out. Should you decide to purchase the unit as a whole, let me know.
I have left you my e-mail and office number via e-mail.
Thank you,
rwmaliklaw
Do you still have the Navik? I’m looking for one.
wm_neumeister@hotmail.com
Did you find a Navik?
I want one too
Jamie
Hi:
Is the Navik self steering still for sale?
Jamie
Any chance your Navik is still available… I’d like to get one for a 25 ft boat.
I have one that is for sale that is on a 28 ft boat that was on a fresh water only use boat
How much do you want for your Navik self steerer? Also, I’m new at this site. How do I contact you about this?
–Jack
please contact me at 920-492-1625
is your Navik still available ?
I have an original Plastimo Navik Self-Steering Gear technical guide book. 49 pages of instructions, diagrams and photos. We keep the book but can email you a PDF copy.
—
i have the requested item stated in your id please get back to me with what you are looking to to my email address kelvin152201@gmail.com
Wanted —-the forward splash guard for a sunfish sailboat……RIS
I have Sunfish Splash rail for front of cockpit
Hello any chance you still have the splash guard?
we have several of these at the Boaters Resale Shop of Texas.
wanted, a raymarine e 80 or e 120 used in good working condition.
thanks
We have at least 2 of these. Here is a link to the page on our website.
http://boatersresaleshopoftexas.com/search?q=e80
you have to copy the link and paste it into your browser window.
Wanted —Uline Ice Maker
I have a working u-line ice maker. Condition is fair but it works very well. I am located in chester md on kent island. I would take $100 for it.
Wanted – ALPHA 3000 Autopilot parts as spares for my existing system. Need the Compass & Compass Control box, and the Control Unit. Used OK as long as they work.
I may have what you need a B&G /Autohelm /Raytheon (depending on who or where or when it was sold) tiller pilot with remote head.
Send pictures.
Eric
Raymarine RD218 (analog) and cable
I am seeking a new or used RD218 (non digital version) part number E52079 scanner and a 15m cable (PN M92668). I am located in Washington State.
looking for yamaha outboard motors 2.5 – 3.5 hp to buy
Hi,
I’m looking for a few items I was hoping someone might have or be able to keep a look out for.
-2 Barientt 28 self tailing winches or similar
-a Muir VM500 horizontal manual windlass or similar
-a short shaft outboard with onboard fuel tank (~4-5hp)
Thanks,
Josh Muckley
I do have an older 4hp outboard suzuki and I think I may have the those winches as well. I will have to dig them out and check the size if your still interested.
I have a winlass model number / mm… Serial h649. Dv 12. Complete setup?
8502813867 call text , night best
What brand windlass do you have? Make? Model? Pulling weight? Material?
We have several small outboards available now at the Boaters Resale Shop of Texas.
I’m looking for second-hand quadruple rope clutches for my 2000 Hunter 410. I’ve got triple Spinlock XTs now – and I need more!
I have 3 Spinlock clutches on my website for sail hopefully they work for you
Looking for a charging cord for my Raymarine/Ratheon “Ray 106” handheld radio. I have the radio and charging stand, but cannot find a charging cord. Any help appreciated.
I’m looking for an old wooden block ,5″ tall preferably a triple but a single and a double would do.
Lenco Actuators, x2
Looking for front nose piece for my 1988 16″ sylvan back troller V bottom boat.
looking for used laser rudder complete.
Still looking?
Wanted-bow anchor lid cover for my 2002 29′ Baja Outlaw
Looking for 19meter extrusion 10kg per 1m.
Selling 21,6m z1250s complete standing rigging+mainsail from Sun Odysay54ds .
contact:via52sail@gmail.com
WANTED 2 x SWING UP RUDDERS FOR 36/ 42 foot catamaran approx 1m long foils
WANTED 2 x CENTERBOARDS APROX 2.5 m i can cut down
WANTED 12m WING MAST FOR LARGE SAILING CAT CARBON OR ALUMINIUM
2 x 20 HP or 25 or 30 hp high thrust outboard 4 STROKE MOTORS
LATE MODEL
Looking for one Lewmar winches 44ST two speed aluminum and two 48ST two speed
still looking?
Please E-Mail me
thesailingsourceguy@yahoo.com
Wanted- replacement boom for an NA-40, 13’10.5″ – 14′ 6″ would be great.
We have several booms that would work for you at the Boaters Resale Shop of Texas
Dear Sir.
I look afte to bey second hand for my boat!
Cetrek auto pilot 701 (The kontrol Unit) Main box for cockpit!
Kindly Jens Busk S/Y Thor-Christ in Turkey, but I am now here in Denmark!
Dear Jens,
Maybe I can help. I have a complete Cetrek plot 701 system except the elektromotor (that part was broken) for you. Incl. Compass, controle box, rudder position and main box. Of you have this system in your boat, this could be very handy for spare parts..
Please let me know of you are intrested.
Ryan
Hi
Im looking for a control unit 701 for a cetrek autopilot 701
Have you still got one for sale?
Jim
Wanted: Merriman hydraulic value for a 1979 Lindenberg 26 sailboat.
still looking? I may have an old multi-function available – Merriman/Vertex if my memory serves me right.
I would be interested in the lindenberg hydraulic parts
WANTED a set of helm seats, or a reasonable place to purchase them w/ sliding pedestal (able to move closer to or further away from helm). If you know of used in decent condition please let me know.
I know this is a long shot but, i have a chair you may be interested in.
If you see this. PLEASE try to contact. email brittanyfrank2016@gmail.com
WANTED yanmar yse 12 .running prefered..av old yse but may cost too much to rebuild ..
I have a running YSB 12 that I just pulled out for a larger horsepower repower. It is available if you are still looking.
I have one fresh water only YSM 12 includes tranny reverse gear
Looking for a 20×20 deck hatch . Project boat in progress…..
I think I have an ~2×2 hatch cover
dinghy 8′ with oars
Looking for a Merccruiser cooling tank new or used part number #804238139
please email me at yellowslr@yahoo.com
looking for twin 6 cylinder marine perkins diesels or twin yanmars
Hi am looking for a 72″ selden mast for a bavaria , if someone as one for sale can you please let me know , i be so great full.
Peter
Have brand new maintain with batters … running Gennaker
Leave a message via e-mail
Need lower lifeline gate for 1985 Catalina 30. Lifeline is dual level, and gate is at aft end.
Looking for a rear mount hynautic helm 3 line H50
Also a air valve /filler plug for reservoir to pressurize quickly.
Wanted-
I need a replacement roller quad pack for my 1968 EZ Loader trailer. This has the 4 white (neoprene?) rollers on round bars that pass through the flat-stock mounting bar.
Thank you-
Kevin
WANTED – Hi, I am looking for a soot filter for a boat. These are the first two companies I found in the Internet:
http://www.dcl-inc.com/pdf/marine/MARINE-X-diesel-particulate-filters.pdf
http://www.nettinc.com/omail/marine-exhaust-emission-control-solutions-dpf.html
Did anyone had experience with them? Do you know any other company that can help?
Thank you,
Natalie
Wanted: boat steering wheel (18 in.) with a 1in. tapered shaft.
Please, needed as soon as possible. Email: mawmaw2012d.b@gmail.com
Looking for Carbon racing sails to fit my Adams 10m – (31ft racer)
Can buy big and cut down.
Will be in NC late may
Mark
I am looking for a swim deck to fit a 2012 21ft. Crownline.
any help would be deeply appreciated.
Mike
I have two swim decks made from teak wood with one step ladder.your choice cheap.
i am looking for b/top for my 40 ft silverton converteble
Wanted. 1997 Cajun Fish and Ski gas fill line cover.
WANTED OLD WOOD BOAT IN ANY CONDITION TO REPURPOSE
Need lower mercury unit for 85 hp early 80’s have one call me 6182671605
Dear Customer,
We saw your ads and we will like to know if you still interested in the Engine.
We Currently have one 85 hp Mercury Mark 58 A Classic Vintage Outboard Boat Engine in stock.
85 hp Mercury Mark 58 A Classic Vintage Outboard Boat Engine Cost $3,500 USD.
This is a very desirable Classic Mercury 85 hp Mark 58 A Outboard fully restored. This Mercury 85 hp has been completely serviced and runs perfect. These are very hard to find in this condition and are very popular for use on vintage boats. This engine has a 20″ shaft. This motor has an alternator(battery charger) , electric starter and a pull starter. These classic Mercury Mark58A outboards have 4 cylinders which makes them very smooth while in operation. This Classic 85 hp Mercury is set up for a remote steering wheel. We have fully restored the engine with a Dupont paint job and decals. The engine is in showroom condition that will turn heads in an establishment or on the back of your wooden classic boat. The weight on this outboard is around 150lbs. This will make a perfect opportunity to own a piece of boating history.
Please email us for more Details
Thanks
Wanted and I pay Cash…
1) Used Morse Shifter and throttle cockpit side mount for sailboat the entire unit
2) Used Edson Pedestal Steering complete system no missing parts
3) Used Dinghy Davits for sailboat in working order
4) Used Life raft 4 person or bigger that can be certified or is certified
I wont pay for something used that costs more than brand new…
if you have any of these things for sale and want cash money
email: captkakashka@gmail.com
We have a used liferaft from a previous boat, i believe it was certified in the 80’s. No idea if its worth anything since its so old. It has been stored in our house since we purchased the boat
WANTED…I am looking for a GS-100A Taco top mount outrigger base. I only need one or the internals but I can negotiate if you are looking to sell both.
Thanks,
I am looking for swim platform(fiberglass) for 92 sea ray 270 sundancer. call me 859-755-4529 or email me bjkingston83@yahoo.com
Wanted: Barient 24 2-speed self-tailing winch, operational or one for parts.
Thanks,
K G Palmer
Hi Kelvin,
I have a set of Barlow 28 / Self Tailing Winches listed if you are still looking.
Thank you,
Caroline
Hi Kelvin,
I have a set of Barlow 28 / Self Tailing winches if you are still looking.
Thanks,
Caroline
I have one aluminum Barient 24 self tailing winch for sale. Located in New York. $400
Still available.
WANTED: 20kg UK Bruce anchor to use as my secondary
Thanks
smooth sailing and fresh warm breezes,
Tony
s/v Marite
43′ Shannon Ketch
Hi,
I have a brand new never used (in storage since purchased) 30kg Bruce.
Don’t know if this might work for your primary or what but these are hard to find these days. Let me know if you have any interest. Asking $400.
Thanks, Wally
Vancouver 42 cc
TOUCAN
Hi Tony,
I might have a anchor that will work. I will look tomorrow for you.
Thanks,
Caroline
wanted – I am looking for an “Aft Drop Box” for a Grady 222 Fisherman.
It is one of two tubs that sits between the aft hatch and the battery compartment
The dimensions of the drop box are 13-3/4 (long) X 12-3/4 (wide) X 8-1/4 (deep).
I called Grady and the local dealer. No luck.
Any ideas where I can get a replacement?
Looking for a half tower and/or hard top approx 9′ w x 10′ l. in restorable condition.
Hi, I have a 1999 Yamaha Exciter 270 and I need the 5″ rubber screw in clean out jet drive plug and SS rod from under the rear deck hatch, anybody out there help. Thanks Ray
Wanted… the back portion of the bench seat for a 2003 Starcraft Aurora 2000
Wanted: Speedometer for 1998 Four Winns Horizon 180
Wanted – Fully Functioning Raymarine S3 course computer.
Cheers Steve B
Wanted — Rudder for Pearson 26 sailboat.
Hi Joseph,
I may have one but wanted to see if you found one yet?
Thanks,
Caroline
WANTED: Twin Disc mg 514 3.1 I dont care it its used or damage im interested in buying it
I have 2 mercury 2.5 v6 offshore outboards in parts. Both have good power heads and loewrs. Also a lower for a 60hp mariner a 60 HP Johnson 3cyl a 15johnson short and a 8hp evinrude long sail boat motor.All late models from 1990s up. Jim 6313948478.
I have several used boats very inexpensive that are fixable. Need to clean boat yard out of old stuff.Jim 6313948478
Do you have a Cape Dory Typhoon?
Wanted
Left and right windshield supports from a 1979 or newer Glastron CVX 16 to 20. Let me know what you have and a price to hemirt@shaw.ca
Thanks you
We need a mast for one of our J24s. This will be shipped overseas and top condition and the best price will make the deal.
WANTED: windshield for a 95 Larson 174sei. Walk through.
I have this item you can call me at 360 451 6498
windshield for 2001 crestliner sportfish
I have a 1976 21 foot Fibreform with a flying bridge. Im looking for the windshield that attaches to the front of the flying bridge. Not the cabin windshield. Thanks.
I am looking for an outdrive for a 1965 gulfstream
WANTED
I need a mast for a Cape Dory Typhoon Weekender. Must be an original for the boat and in good condition.
WANTED
Looking for a used Dock Box fairly inexpensive in the Ohio Lake Erie area
Wanted wheel pilot
We have available flwg Gear Box for sale.
ZF 2060 : 2 Unit : Sparingly used / 2007 Manufactured.
ZF 3050 : 2 Units : Brand New / Unused.
I am looking for a stern pulpit for a 23 ft Ericson sailboat
Let me know if you have one.
Larry
Wanted..mast for a S2 7.9. It is 10 m or 33 ft. It is deck stepped ,,will consider mast close to correct sizeam in northern Alberta,western Canada,boat is in great condition ,so be great to find one…….or I would sell the boat ,motor and trailer….Ralph
Wanted. Mast for S2 7.9 prefer in western Canada….tow-guy (at) hotmail dot com
I am looking for a Lenco”JOY RIDE” electronic directional controller that was used on an electric boat called an INFINYTE I4. The boat is no longer made but I need this part to operate the boat correctly. I have one now but need someone that could repair it by aligning magnets inside the controller for directional purposes. Please contact me if you can help me. THANK YOU cafe9228@msn.com
NEWPORT 30 PROP 13-RH -7/8.
Hello:
I have two sailboat props at home. One is a two blade from a Hunter 27 and the other is a two blade from a Tartan 30. I will try to get specs on them for you. The Tartan 30 will be completely gutted soon so let me know if you need anything else. Email me for more info. I am in Connecticut.
Looking for Anchor hatch and Passage hatch 1977 Sea Ray Sedanbridge original hatches are teak but looking for any.
Wanted_outboard motor lift like Forespar MotorMate or Nova Lift etc.
Thanks
I’m looking for a Mercruiser 250 4.1L L6 complete (I don’t require the outdrive) – any condition as long as the block is good. Let me know and thanks!
Looking for a Northstar 4KW RDR1042 dome 24 inches across, Anthony
Wanted: material to make an extendable bow sprit to fly a spinnaker. Approx. 8’ and it could be ready made to purchase.
Wanted: Simrad MSD Stern Drive Unit with or without cable.
Hi,
Looking for an Isomat Boom 10′ 1″
4″ high/ 3 1/2″ wide
Hello all. I a have a neat older semi custom 22ft sport boat in need of a mast. Old one stolen. Who does that!!?? A J70 mast would be perfect. Next would be a J22. Next anything around 28ft, bendy and wouldn’t explode w mast head A sail. Lemme know… Thanks!
I am looking for the fuse panel, the speedometer and any other dash board electronics for the Sea Ray sundeck 240. Please reply to mark@pridehospitality.com Thank you
uused good lower unit for a 1970 Mercury outboard
WANTED.Looking for windshield and /or windshield parts for a 2002 Formula Fastech 292. Need front port glass and both top frame pieces for the front. Top trim of port wing window. OR race fairing that would fit same boat. I’m sure that windshield from the next few years would be the same
Wanted – a swim platform to fit a 1994 Scout sportfish, this is the model with the angled transom.
Thanks
Bob
Looking For:
1990 1991
Windshield and frame
Dash Pod
Wanted: I need a used 12.5 k gasoline generator for a houseboat, or someone who can repair the Kohler generator I have. It runs, but will not produce the required voltage.
Wanted: Looking for a used Part Number 3860525 Wire Harness – 1999 Volvo Penta 5.0Gi. Part discontinued and no alternative provided. Thank you for your help.
Wanted: Looking for a 41+’ blue water mast with rigging for an old 36′ Cascade/Person etc. restoration (preferably a cutter but sloop is fine). I am located on the West Coast (USA).
Thank you,
Mark
I have a 48 foot with cutter all rigging sails boom spiniker pole in real good shape parting out 32 ft valiant repainted around 6 years ago boats been on hard for 4 it in Portland or 5000.00 for all standing rigging looks all most new and heavy or you my call or text 360-747-3948
Send us a list of what you’re looking for and I’m sure we can get what you need. Between the warehouses we have mountains of rigging and hardware.
Best,
Joshua
om / sailboat company
805-234-0559
http://www.omsailco.com
Hi,
We are interest on a SIMRAD AP22, do you have one available? How much would be its price?
Regards
WANTED: Looking for parts off of a Kohler Boat gasoline Generator Model # 7.5kw R23
Spec. 106-214A 4Cyl.
Thanks Howard
Please contact me
What else do you need?
Wanted: Looking for parts off of a Kohler Boat Generator gasoline Model # 7.5kw R23 Spec. 1406-214A (Water Cool Manifold w/end cap).
thanks Howard
Please mail me as soon as possible if you are still interested in buying the Kohler generator parts.
Thanks
I have interest too., Please send me a pics
Looking for a Water Cool Manifold for a Kohler generator 7.5kw R-23.model.
Still need a manifold?
Seeking a vented propane cabin heater for 40 foot sail boat, would consider diesel also
I have a marine propane heater. It’s a force 10 cozy cabin model 1000
Wanted: Tiller arm for a Honda B10 (100) Model Early 1980s Model
Hello,
I m seeking and looking the lower furler drum of a Facnor LS180 Drum for a 2008 JEANNEAU 42.
Please let me know if any leads.
Ace
Sailingbaylana@gmail.com
Hello. I’m looking for the raymarine M81130 actuator.
Wanted a windshield for a 1999 Crestliner Fishhawk 1650 SC
Looking for Radar dome Furuno RDP-036 an cable /working! THANKS Billy april 1,2019
wanted Looking for Radar dome Furuno RDP-036 an cable /working! THANKS Billy april 1,2019
Looking for used parts for Universal m2-12 exhaust fitting plate on back of engine with flange to pipe part 300802
Wanted: port side windshield for a 2010 Tracker Targa 18v combo. Part #TR119090. Does anyone have one?
Maybe you can help I want an Fiberglas tower with a Bimi top that will fit my E6 crownline I can’t find one online I see a lot of older boats that have them just maybe a wrecked one might be available a new one is outrageous 6000 plus
WANTED: Looking for a cheap running boat motor. Just send me a pic of what u got.
Looking for a swim deck for my 1990 Glaston 19ft. Teakwood or fiberglass.
WANTED: RayMarine VHF “RAY215” Particularly need the Mic and Cable, as mine is deteriorated on the curly rubber part exposing the wiring. Part Number is R49015.
(I’ll buy the whole radio if available).
My email is SRStiens@aol.com
NEED A WINDSHIELD FOR 1999 LOW BASS BOAT (MODEL 180)
T. LAND 217-227-3795
WANTED
Engine control handle for mid-1960’s Edson pedestal.
6 inches long with 1/4 inch hole for rod running down through pedestal to control cable under deck.
Thanks,
Wanted Facnor 180
Looking for a V-Drive for a 2014 Moomba Mojo 2.5
Looking for old style Lewmar deck switches for powered winches. They are part number 69000018 and approx 3.15 inches in diameter (80mm)
Wanted – Crownline 2016 21SS LPX Portside Dash, Black. Part #40134. Thank you!
Wanted a pontoon console with guages.
WANTED Yanmar V Pully for 3JH3E
PN 129171-21650
USED (Yanmar discontinued making these)