$1,500.00
USED HURTH ZF TRANSMISSIONS(2)
- Age: 1994 or very close
- Condition rating scale: Used; 3 / 5 - Good – small cosmetic flaws
- Equipment Manufacturer: Hurth
- Model or Type: ZF HSW 630
- Weight: 50 lbs
- Quantity: 2
- City: Lexington
- State: South Carolina
- Zip/Postal Code: 29072
- Listed: August 9, 2020 11:00 am
- Expires: 11 days, 7 hours
Description
Two Hurth HSW 630 transmissions with approximately 560 hours on them each. I had to buy them as a package along with the engines, prop shafts, and props. I just wanted the engines for stern drive setup. Engines ran perfect after I installed them. The transmissions, prop shafts, and props are still in my shop….. been there for 10+ years. Very minor cosmetic flaws. Need to get out of my shop. May deliver or ship for free. Please note that the price is $1500 each. The prop shafts(2), props(2), heat
exchangers(2), and bell housings(2) are available.
446 total views, 1 today
3 Responses to “USED HURTH ZF TRANSMISSIONS(2)”
Leave a Reply
You must be logged in to inquire about this ad.
Sailrite
The Boatyard
-
Measuring sails for replacement
When you need a new sail, there are lots of options in the used sails market. Measuring sails for replacement will give you the information you need to purcha...
-
Boat Donation Programs
at Donation programs take boats and use them in their in-house programs for a while before eventually selling them on. These Non Profit organizations will evalu...
-
Selling Used Boat Equipment
Selling Used Boat Equipment? if you are one of the best places is UsedBoatEquipment.com. UsedBoatEquipment.com is a website for selling used equipment like a...
-
Vented Loops
Vented Loop Vented loops or Anti-Siphon Valves: are inverted U-shaped pipes with a vent at the top to let air escape. Vented loops are found in toilet disc...
-
Engine Panel visor
Seaworthy Goods based in Florida have come up with an Engine Panel visor. The Engine Panel Visor is a custom cover to protect your boats engine panel from water...
Do you have pictures
if these gear boxes are convenient for engine 450 HP & 1800 RPM please advise reduction ratio and some photos and then I will buy the 4 Pcs
Please send photos and confirm if these gear boxes are convenient for engine 450 HP and 1800 RPM
if so I will buy all the 4 and shafts