Welcome, visitor! [ Register | LoginRSS Feed

Post an Ad


Sea Recovery Water Maker – Ultra Whisper – Requires Repair

  • Condition rating scale: Used; 3 / 5 - Good – small cosmetic flaws
  • Zip/Postal Code: 93001
  • Listed: March 4, 2018 12:36 am
  • Expires: 57 days, 22 hours


Sea Recovery Water Maker – Ultra Whisper – Requires Repair

Make 50% Deposit
SKU: 3561

Filters Replaced 07/2016
Serviced and checked on 11/2017
Complete system with water pump, 2 filters and membrane
*** Needs repair – presumed low pressure issue
Performance Rated Performance / Product Water Produced: +-15% at 820 PSI / 57 BAR, 77°F / 25°C & 35,000 PPM TDS typical sea water
Production / Weight
Model # Per Hour Weight – Compact Weight – Modular
16.5 gal / 63 lit
25 gal / 95 lit
145 lbs / 66 kg
155 lbs / 70 kg
140 lbs / 63 kg
150 lbs / 68 kg
Salt Rejection
(Chloride Ion) Minimum 99.2%, Average 99.4%
Product Water Temperature Ambient to feed water temperature
Pressure Adjustment Automatically controlled
Salinity Monitoring Automatic electronic monitoring. Temperature compensated with the digital continuous readout. The salinity monitoring components of the system give a continuous TDS readout in ppm (parts per million), are temperature compensated, and of a fail safe design.
Salinity Range Designed for seawater use up to 50,000 PPM TDS (NaCl) (typical seawater salinity is 35,000 ppm)
Temperature Range Max. 122°F / 50°C, Min. 33°F / .5°C
System Feed Water Flow: 4.5 gpm / 17 lpm (depending on system)
Reverse Osmosis Membrane Selected High Rejection/High Yield aromatic tri-polyamid, thin film composite, spiral wound, single pass, high rejection reverse osmosis membrane element.
Chlorine Tolerance 0.1 PPM
pH Range 3-11 (typical seawater pH is 8)
System Pressure Feed Water: Maximum 35 psi / 2.41 bar / 2.46 Kg/cm2
System Operation Seawater nominal 820 psi / 56.5 bar / 57.66 Kg/cm2

External Installation
Water Connections Pipe sizes to be supplied by the installer for connection of the SRC supplied components. The below pipe threads are all US Standard.
Feed Inlet: 1/2″ MNPT Male National Pipe Thread
Brine Discharge: 1/2″ MNPT Male National Pipe Thread
Product: 1/4″ FNPT Female National Pipe Thread

Ad Reference ID: 3055a9b858892345

No Tags

1084 total views, 1 today


2 Responses to “Sea Recovery Water Maker – Ultra Whisper – Requires Repair”

  1. Is the watermaker still for sale?

  2. Powder Monkey on October 15, 2018 @ 2:35 am

    How old is the unit ? how many gallos per hour


Leave a Reply

You must be logged in to inquire about this ad.



The Boatyard

  • Measuring sails for replacement

    by on November 26, 2016 - 0 Comments

    When you need a new sail, there are lots of options in the used sails market. Measuring sails for replacement will give you the information you need to purcha...

  • Boat Donation Programs

    by on January 10, 2016 - 1 Comment

    at Donation programs take boats and use them in their in-house programs for a while before eventually selling them on. These Non Profit organizations will evalu...

  • Selling Used Boat Equipment

    by on October 29, 2015 - 5 Comments

    Selling Used Boat Equipment? if you are one of the best places is UsedBoatEquipment.com. UsedBoatEquipment.com is a website for selling used equipment like a...

  • Vented Loops

    by on October 14, 2015 - 0 Comments

    Vented Loop Vented loops or Anti-Siphon Valves: are inverted U-shaped pipes with a vent at the top to let air escape. Vented loops are found in toilet disc...

  • Engine Panel visor

    by on September 27, 2015 - 2 Comments

    Seaworthy Goods based in Florida have come up with an Engine Panel visor. The Engine Panel Visor is a custom cover to protect your boats engine panel from water...