Welcome, visitor! [ Register | LoginRSS Feed

Post an Ad

Boat Salvage Yards

| Salvage | August 28, 2015

This is a directory of Boat Salvage Yards by State in the US plus some overseas Businesses. These are Businesses which will come and help you dispose of a boat. Each has their own way of doing things so call for Information.

Boat Salvage yards operate in a variety of ways. Many charge to take boats away or will pay cash for the boat depending on condition, value etc. They can scrap the boat by removing all the useful hardware and the dispose of the hull, or they may sell the boat on.

 

David McMasters
DE
FL
FL
FL
MA
MD
MD
MI
MO
NC
NH
NV
NY
NY
OK
Ontario
Ontario
 MI
OR
SC
SC
TX

greenrenaissance

No Tags

168220 total views, 29 today

  

129 Responses to “Boat Salvage Yards”

  1. looking for A WINDSHIELD FOR 1990 ARIBA 23 FT

  2. looking for transom corner covers for ‘ 78 starcraft 16’ ss

  3. Looking for a dual station shift control Teleflex # M-1094-D3P from 1978 era boat

  4. Looking for a Atkins Hoyle XR90 Venting hatch

  5. Jack Swafford on March 28, 2016 @ 2:05 pm

    ,need prop for 2 stroke Tahatsu 70,s model…straight shaft not spliced…..25 h/p

  6. Wendell Grover looking for old sailboats in Southeast Georgia or Northeast Florida to haul off or buy reasonably

  7. phone no. is 912-288-0743

  8. randy olinger on March 30, 2016 @ 6:54 pm

    looking for a bimini top for a 1993-1995 grady white adventure.oem

  9. Luis Hernandez on April 1, 2016 @ 10:15 pm

    I looking for a stainles seel housing in the pulpit of Angler year 2003 model 2500. The part name is anchor roller.

  10. Joanne Strzempek on April 11, 2016 @ 5:55 pm

    looking for old airboat propeller for my wall

  11. Ron Spaeth on April 11, 2016 @ 9:54 pm

    Looking for a windshield for a 1995 proline 231 WA.

  12. Looking for a boat 17 to 20 ft no motor don’t really matter about brand good shape only

  13. James Wright on April 15, 2016 @ 8:53 pm

    Looking for newfound metal ports 7×26

  14. Jim Bridges on April 18, 2016 @ 6:18 am

    Looking for a 6 to 7.5kw diesel generator, used (in good shape) or rebuilt. Any manufacturer. Thanks

  15. Rick Streiff on April 21, 2016 @ 8:08 pm

    Looking for a lower unit that would fit a 1987 Johnson 90hp outboard.

  16. Jeff Sevier on April 23, 2016 @ 5:36 pm

    Looking for an aluminum fuel tank
    48″long 25″wide 18″Tall
    Thanks

  17. gavin moran on April 25, 2016 @ 10:36 pm

    http://www.amazon.com/Evinrude-Johnson-Marine-391264-393259/dp/B001UNXE9U#immersive-view_1461334905829

    This part second hand in good working condition including delivery to ireland, how much? For a 80 hp johnson outboard engine

  18. Looking for a Beneteau first 345 port side stern rail or compatible replacement for port and stbd compatible with aftermarket seats possibly.

  19. Mike Cook on May 1, 2016 @ 3:04 pm

    Need a closed cooling system for a 5.7 1999 vortec.

  20. Looking for a toe rail for a benetea 26 first 1988, starboard side

  21. I am looking for a few part for my 1996 Regal Ventura 8.3 SC. If any one has any of this boats in their yards, please let me know. Thanks

  22. I am looking for a walk through windshield for a 2001ranger 619 vs

  23. Mike Rinaldi on May 31, 2016 @ 12:00 pm

    Looking for windshield for 22 foot cobalt made by Taylor made

  24. Gilbert Adkins on June 2, 2016 @ 11:32 pm

    I’m looking for a Cyc Head Cover for Mercury XR2 150 200 HP 6 cyc 1978-1988 Engine # 0A904645

  25. Leo Loiselle on June 3, 2016 @ 1:06 am

    Looking for a used 1980 85 hp Mercury power head

  26. Looking for center section of windshield (walk-through) for ’05 and up SeaRay 270SLX. Complete or glass only ok.

  27. I’m looking for a Vintage twin set Chrysler Marine V-Sea M80 Engines in any condition for restoration project.

    Year preferably 1960 or around, any condition applies from total remanufactured to defective.

  28. 16.5 foot fiberglass boat free!!!! It has no motor and the interior needs refurbished. IT HAS THE DASH BOARD AND GAUGES, STEERING CONTROL, FUEL TANK AND SPEED CONTROLS… FREE!!!!!!! IT DOES NOT HAVE A TRAILER… 5014137165

  29. Bill Erdman on June 25, 2016 @ 6:02 pm

    Looking for Windshield port side ( left ) 1999 tacker targa 18 could anyone please help me locate this item. Thanks 605-209-7500 cell

  30. Bill Erdman on June 25, 2016 @ 6:05 pm

    looking for a windshield for a 1999 tacker targa 18 port side (left ) 605- 209 -7500

  31. Looking for the windshield for a 1991 Malibu flightcraft 21 xlob

  32. Looking for a 1986 fisherman 20 wellcraft fuel tank 60 gal

  33. Hi,
    Looking for a left side curved windshield for a 1992 Stingray 719zp.
    Thanks

  34. I’m looking for two twenty-one ft pontoons to install on my project boat,
    They have to float that’s mandatory!
    Please call den at 262-716-6493
    Thank you

  35. MATT POTTER on July 11, 2016 @ 9:02 pm

    Looking for a anchor hatch door for a 2005 searay sundeck 240

  36. Looking for a fuel cell for a 2000 volvopenta 5.0gi

  37. Allyn Vico on July 17, 2016 @ 11:05 pm

    Looking foe a control unit for a 1977 Reinell 170 I/O, model #M-1083-D2. Could also use a Owners Manual for the same boat.

  38. I need a drop in 5.7 MerCruiser inboard motor 1995 Please let me know if you can help

  39. Looking for a side console with controls and steering wheel for a Polar Kraft 16′ Jon boat

  40. David Beberman on July 23, 2016 @ 5:02 pm

    Looking for two part engine cover for Four Winns 1989 Horizon 180 Bowrider I/O engine.
    This is a two piece cover. Upper part is cushioned to sit on, lower part if rug over
    wood and fire retardant. Lower part’s wood has rotted out.,

  41. Jeff taylor on July 24, 2016 @ 11:56 am

    1977 Starcraft I need a center console. Something that will fit will be fine needs to be less than 37 inches wide .

  42. I’m looking for a used 1992 Yamaha 200TXRQ powerhead for parts, complete motor if reasonable enough! Doesn’t need to run can be locked up, doesn’t matter, just needed for parts! Thanks

  43. Need a t top for a 1997 cc mako

  44. Dave Jensen on August 7, 2016 @ 3:12 pm

    I’m looking for a seat cushion for a 1995 Bayliner 2050 Capri SS Sport. Boat has rear bench seat. I’m looking for the center seat cushion

  45. joseph m ryder on August 7, 2016 @ 6:13 pm

    Looking for a rudder for a Pearson 26

  46. Jeff Shields on August 15, 2016 @ 3:00 pm

    Looking for a console for a 1994 Tracker pro deep v 17 ft. boat was near a fire and console was damaged. Any hints on where I can get a console would be appreciated.

  47. Harold Brogden on August 29, 2016 @ 1:49 am

    Looking for a marinetek maxim max 6 fishfinder

  48. Need a whole steering console for 17ft alumicraft boat.”17 pro tournament” .Someone tried to build a wooden console and it looks horrible so I’m trying to find an original.

  49. Looking for control box,,to shift gears for 85 Evinrude 76 model ASAP Thank you

  50. Jayar Romansky on September 6, 2016 @ 1:48 pm

    Looking for a horn off of.a large ship

  51. Looking for a2005 yamaha 2 stroke 20 hp lower unit and also a top cowling (hood). Before you contact me would you please make sure it will fit model #20mlh. It’s dark grey metallic. Thanks for your time

  52. Need full windshield for 1991 Grady White 22′ seafarer, including glass and aluminum frame

  53. Looking for a 2005 Yamaha 20hp model 20 Mlhd 2stroke top cowling (hood) contact Wil at 604-795-4858

  54. I have a boat trailer which I would like to despise off are you guys interested?

  55. Ben Pelletier on October 3, 2016 @ 7:29 pm

    Looking for a gear housing for a Volvo Bow Thruster QL BP 800 part number 41100645

  56. Looking for a 5 piece walk thru windshield for a 1999 Starcraft 170 star fire

  57. Looking for a single bolster helm chair

  58. Looking for a Grady White Springfield single outboard bracket for a 1988 Grady seafarer 228G. Thanks!

  59. Am am looking for a mast car for the spinnaker pole, new or used.
    The type which fits the integral track of the Z-Spar X-600E mast. The track is ~ 3 1/2″ (87mm) wide, extruded from the forward side.
    (as on Beneteau 411, for example).

    Here is the picture of such cars:
    http://www.slow-cruise.com/b411-spinnaker-cars.jpg

    The fitting end is not important (as I will have to replace it with a ring to fit latch/piston type of pole end fitting).

    Do you have any of such cars?

    Kind Regards
    ~~
    Alex
    http://www.slow-cruise.com

  60. steve bradtke on October 26, 2016 @ 6:54 am

    Hi im looking for Mercury 830046 15 MRB ECU off 01′ 250 Pro XB…

  61. Donnie Parker on October 27, 2016 @ 7:37 pm

    Hey looking a windshield for 2008 ski Natique 196

  62. Chris Jackson on October 31, 2016 @ 1:20 pm

    Looking for 69W-45301-00-8D lower unit housing. Will buy entire used working unit if housing not sold separately. This housing comes on the following Yamaha outboards:
    F50 (2005) – (2011)
    F50 D (2005)
    F50 A (2012)
    F50 B (2013) – (2014)
    F60 (2005) – (2011)
    F60 A (2002)
    F60 A (2012)
    F60 B (2003)
    F60 B (2013) – (2014)
    F60 D (2005)

  63. Brian Wathen on November 3, 2016 @ 11:49 am

    I am looking for a mounting plate on a Formula 400 SS for the Stereo. This is the Acrylic Plexiglass that is 1″ thick. It also has the vents cut in it for the AC. Any help is much appreciated. Sincerely

  64. Looking for a large amount (over 50) of used stands for sailboats and powerboats

  65. Hi , we need to find a used Alberg 30 rudder ASAP for a trip that was interrupted by some rock. Thanks.

  66. Hello,

    I have a 1991 SeaRay 270x cabin cruiser. Single Mercruiser. Trailer tires 80%. Generator a/c and heat. Good runner. Looking to find her a good home. Email me for more information and pictures.

  67. Fernando de Martino on November 17, 2016 @ 6:18 am

    TURNBUCKLE

    I look for a Norseman turnbuckle for one of my forestays of my sloop rigged sailboat.

    The sailboat is a 47 ft. with 2 forestays.
    The forward forestay is by mean of a furling jib and it is complete.
    The second forestay needs a turnbuckle.

    The keel stepped mast is 18 m. (59 ft) high from the deck (20 m. from the keel).

    The second forestay reaches the mast at about 14 m. (45 ft) from the deck.
    This forestay is 10 mm. (25/64″) in diameter.
    The lower end of this forestay has a Norseman fork.
    On the deck, a fitting with an eye is installed.

    I therefore need 1 turnbuckle for this second forestay.
    The turnbuckle should have an eye on one end and a fork on the other end.
    The pins are 19 mm. (3/4″) in diameter.
    The distance between the forestay end and the deck fitting is 55 cm. (22″).
    This should be the maximum extended length.

    I am willing to consider the use a connecting plate, between forestay and the fitting on deck, to then use a shorter turnbuckle.

    Thank-you

  68. I’m looking for parts for a 1988 sun runner weekender 235, please let me know thanks

  69. Looking for windshield piece for a 2006 STARCRAFT AURORA LTD. Needing the starboard side windshield glass section right in front of the driver console. THANKS !

  70. Looking to sell my boat ASAP its a mid 50s boat and trailer have papers for both for information and pictures plz reply to me

  71. Looking for used parts for 2012 Mercury Vvarado 175 HP outboard motor ser.# 1B904928 call 306 630 2789

  72. Am looking for 2003 Searay sundeck drivers windshield.

  73. Looking for a used Formula 353 Fastech Engine Hatch. Estimated year around 2005

  74. Charles S Carter on January 10, 2017 @ 4:34 am

    Looking for Sears jon boat emblems. Will say Sears or Gamefisher. Need two. Thanks

  75. Looking for a power trim unit for 2092 Yamaha 250. The motor use 4 cables

  76. I am looking for a COMPLETE WINDSHIELD OR PORT HALF FOR A 1998 SEA RAY BOWRIDER.

    • Hi: I need the starboard side windshield and walk through door for a 1996 175/BR/CB I/O.
      Possibly we could split a complete set if compatible to both of us

      • Have looked all over and can’t find a used starboard side and door for mine. Have you had any luck? Per the Sea Ray site our boats use the same windshield if yours is a BR I/O. Am considering ordering new parts from Taylor Made (OEM). May be a savings opportunity if we order a complete windshield. Please reply soon; about 2 month delivery time.

  77. I need the starboard (right) side curved windshield and walk through door for a 1996 Sea Ray 175 Bow Rider, Closed Bow, I/O. I believe the OEM part #’s are 867788 and 867762

  78. Looking for porthole trim for 1989 Sea Ray 390 Express Cruiser.

  79. I am looking for inboard / outboard Complete stern drive or possibly complete motor and sterndrive

    Jasoncmayo@hotmail.com

  80. glen humphrey on April 25, 2017 @ 10:10 pm

    1997 force mercury 75 hp flywheel 0e276470 part#261-9007-c3

  81. I am wanting to look at starting to build a flats boat. I am not exactly competing for a shallow pan runner more of a good steering 18′ to 20ft . I want to rework or make a mold for a flat or open deck CC . Trying to get something reusable or repairable, and wanting to stay under 100 hp outboard. Could possibly wind up jetski drive, but for now looking for cheep hulls usable or choppable or reuse recycle fiberglass supports. I am NE Austin, TX area

  82. Looking for a cradle for a 30 ft. Tartan sailboat. I live in NE, Ohio.

  83. Looking for an Aft Hard top and Radar Arch for an 1986 Carver Aft Cabin 3607

  84. Searching for windshield for 1998 Cobalt 25 LS. On this boat windshield curved around to cover the cockpit console only and was made of plexiglass.

  85. Searching for windshield for 06 Tahoe Q6 as well as the rear ladder or just the hinges and bimini top red as well. You can contact me slaytonkris@att.net or 281-515-8986.

  86. Looking for compleat windshield for a Crestliner walk around cuddy. Model Eagle 2160 but others but
    Other Crestliner or any walk around cuddy.

    Thanks
    Jerry
    925-917-008

  87. Looking for a CDI module for a 15 hp Honda outboard. Motor is a 1990.

  88. I am looking for a Minn Kota pushbutton assy 9953154 for a EP-130 electric motor system

  89. jimmy hammett on December 6, 2017 @ 12:24 pm

    looking for a center console for 19ft kenner c bay boat 1999

  90. I am trying to find a burner base for a Shipmate pressurised kerosene cabin heater. They used the same base on their stoves as well. (I have one of their 3 burner units and really like it) I have managed to strip the base and can not install a new burner. Burners are easy to find, bases it seems impossible. I can send a pic if you want. If you want to look at the heater go to the website then projects and then cabin heater.

    Thank You

  91. Michael Robert on January 22, 2018 @ 8:57 pm

    I am looking for all seats and rear deck padding for a 2002 Sea-Doo Challenger 1800.
    Please contact me.

    Thank You

  92. I need for 1990 mariah 1850 xl
    Left side windshield
    And two captain seat
    Please if you have let me know,thanks

  93. I am searching for replacement aluminum railing for a Premier pontoon 22 ft RE Legend is the model and I only need the L front that round to the L door opening

  94. RICK PANGELINAN on March 7, 2018 @ 6:30 pm

    looking for used racor 500fg diesel filters 2ea.

  95. clifton edwards on March 12, 2018 @ 1:45 am

    need a surface side mount control box for 150 hp honda outboard

  96. Looking for 3 multifunction displays for B+G H1000

  97. AIMEE PABON on March 13, 2018 @ 4:45 pm

    Looking for a Radial Drive Wheel for a Hunter 40,1986

  98. Marty Dunham on March 20, 2018 @ 1:00 pm

    Need a complete windshield for 1969 Penn Yan 20ft Sportsman

  99. I’m looking for a mercury BBC 500 blue fuel injected intake set up
    any help would be great

  100. I’m looking for a rear corner seat for a 1994 Cruisers Yacht 2470 Rogue. Anyone have one?

  101. Hi,

    I’m looking for a rear starboard jump seat for a 1996 Bayliner Trophy 2002 WA.

  102. Looking for a Pilot House/Cabin for an Island Hopper 29′. Please email medialink1@aol.com Thanks, Bill

  103. I am looking for the windshield of a 1963 mirrocraft family runabout! In the process of restoring it but need a new windshield. Thank you.

  104. Lorrie Lapollo on May 1, 2018 @ 2:03 pm

    Im Looking for a bow rail to fit a 18 ft SCOUT

  105. looking for parts boat Doral BR190

  106. I am looking a hardtop for a 1999 23′ Boston Whaler Conquest.

  107. I need the post and the winch that’s mounted to trailer for a small 14 ft Jon boat trailer. Whatcha got? 9126650729

  108. David Wilson on June 13, 2018 @ 2:45 am

    I am looking for a wrecked Mako 18LTS Center Console.
    I need a section of the rear outer hull to make repairs on my Mako.

    Please call 903-235-6458

  109. I am in need of a 2008 chaparral glove box. Please email

Leave a Reply

  • Boat Salvage Yards

    by on August 28, 2015 - 129 Comments

    This is a directory of Boat Salvage Yards by State in the US plus some overseas Businesses. These are Businesses which will come and help you dispose of a boat....

  • Conventional Stuffing box

    Stuffing Box Maintenance

    by on September 22, 2015 - 0 Comments

    Stuffing box maintenance You are getting water in the bilge and you track it down to the propeller shafts stuffing box (also called stern gland). The stuffing ...

  • Sailboat Standing Rigging

    by on December 31, 2014 - 0 Comments

    Swaged Rigging Terminals   Sailboat rigging is simple in concept once you have a basic understanding. There are several parts which all work togeth...

  • Prop Puller

    by on August 13, 2014 - 0 Comments

    Prop Pulling Below you will find some of the popular devices for prop pulling There are 2 main methods, harmonic and straight pull through a clamp of some...

  • Swageless Rigging Terminals

    by on December 28, 2014 - 1 Comments

    Swageless Rigging Terminals An alternative to Swage Rigging Terminals are swageless terminals also called mechanical terminals. The beauty of the Swageless ...

The Boatyard Categories

Sailrite

Sailrite

Used Boat Equipment is Stephen Fry proof thanks to caching by WP Super Cache