Used Boat Equipment » Below Deck

Conbraco thru hull fittings

Emily Herman — Sun, 28 Apr 2013 14:20:00 +0000

2″ thru hull fitting with nut. Solid bronze.
Shaft 3.5″
Tread 2″ NPSM
Flange 3.62″

Waeco evaporator

AYS — Fri, 15 Feb 2013 01:35:48 +0000

evaperator

Waeco VD-151-15

Came off Beneteau 331

Porta Potti

AYS — Fri, 15 Feb 2013 01:35:32 +0000

Porta Potti, dometic series 962. SaniPotti 962

http://www.dometic.com/enie/International/Site/Caravan/Toilets/products/?productdataid=68839

PAR remote bilge pump

JKeefe — Tue, 29 Jan 2013 02:26:16 +0000

Par centrifical pump – It’s a giveaway. It is old but it works. I used it as a remote bilge pump but found it hard to get to for servicing. I have since replaced it and do not need it.

Deck fill

Emily Herman — Mon, 26 Nov 2012 18:10:48 +0000

Seadog deck fill. One waste still in bag and 1 waste opened for 1 1/2 inch

keyless cap

Primetime Pump

Baybones — Fri, 19 Oct 2012 17:40:13 +0000

Primetime Pump self-priming centrifugal pump 115/230v AC – ¾” FTP, 1100 gph/10 ft head – $300 (over $445 new)

The Primetime Pump is a quiet, compact self-priming centrifugal that will lift water up to 12 feet (at 3450 rpm) and move up to 21 gallons per minute. It has a rugged cast 316 stainless steel housing with carbon/ceramic Viton bellows mechanical seal making it ideal for marine, industrial, agricultural or commercial applications where compatible liquids are being fed, transferred, recirculated, or filtered.

Specifically Designed for Marine Air Conditioning it can be used in many applications including refrigeration or other continuous duty self priming needs: The Primetime Pump was originally designed for marine air conditioning installations when the pump mounting location is prone to air-lock or requires a suction lift. Even when a pump is mounted below the waterline an air-lock can occur due to hull motion when the vessel is underway. The “Primetime” will purge air from the system and eliminate “Air-Lock” from becoming an irritating issue.

Whale Gusher 25 – BRONZE bilge pump

Baybones — Fri, 19 Oct 2012 17:39:53 +0000

Whale Gusher 25 BRONZE bilge pump mounted on backboard, with handle. Approximately 30 GPM capacity. Minimal to no use over the years, save for periodic maintenance and freshwater run through. Mounted on Backboard, with handle, for use as an Emergency manual Hi Flow bilge pump. You cannot buy a Bronze Whale Gusher anymore, only aluminum.

Sea Recovery ETD

Baybones — Fri, 19 Oct 2012 17:39:17 +0000

Purchased as “new” Refurbished ETD from Sea Recovery. Never used. Carried as spare inventory (over $2200 refurb purchase)

Isotherm DR55 Stainless Drawer Freezer

Mark_Morwood — Fri, 10 Aug 2012 15:00:04 +0000

2 year old Isotherm DR55 stainless steel drawer freezer. Excellent condition. Minimal use – installed 18 months ago, but not used till this summer. We decided for long term cruising that we needed more fridge space instead of freezer space on our boat, so have replaced this unit with a second DR65 Fridge.

The freezer is frost free, 12v/24v/110v/220v multi-voltage. Dimensions are: 540mm x 470mm x 520mm. (21.25″ H x 18.5″W x 20.5″D).

For complete details see the website at http://www.indelwebastomarine.com/Products/us/html/8141.html

Priced to get it off our hands as we have no where to store it.

Mark.

Aquagen 12 Volt Generator / Watermaker

Mark Bradley — Wed, 16 May 2012 17:00:34 +0000

New – still at factory, plans have changed so you may take my unit at almost 50% off and still can modify it to your needs before it ships (discuss extra costs with factory to add hydraulic pump, refrigeration compressor or extra RO cell etc.). Currently configured for 42 gallons per hour watermaking while charging 150 amps at 12 volts from a single cylinder Kubota diesel. Very versatile, offshore proven systems. Factory will need 2 – 3 weeks for unit shipping (you ship from Washington state) once payment received.

Call Mark at 206 303 0020 for further details